Dog treat machine for pet snacks brush, bone shape dog chewing product making
Pet Treats Injected Molding Machine is special machinery for producing pet snacks. With such machine, various shapes can be made, such as hedgehog, crocodile, dog, bone, pork ears, barrel, etc.
The shapes of pet treats are very lovely and it is a ideal encouragement to dogs and cats while they learn a new action or do well in some exercises and games. Also, we can provide different recipes to meet various market demands.
Pet treats injection machine can use the granular material made by the extruder to produce the pet chews. Through high temperature and high pressure, the pet chews molding machine will mold different shapes.Such as bone, toothbrush, Mace, hedgehog, crocodile, dog, pork ears, barrel and so on.The pet chews is a kind of pet toys or pet food. There are many shapes of the pet chews, such as bone, ball, ring, stick, shoes and particle.The pet chews are high-protein and nutritional meat for dogs to eat.
CE CERTIFICATE provided, which strictly meet CE standards and EU countries import policy.
ISO 9001 CERTIFICATE provided, which strictly meet ISO 9001 standards.
a. Raw Materials: adopts corn flour, fish meal as raw materials
b. Products: different shapes are made by adjusting the dies from extruder
c. Flow chart: Mixing system---Extrusion system---Injection system---Molding system---Packing system
d. Voltage in China: Three phases: 380V/50Hz, Single phase: 220V/50Hz, we can make it according to customers` Local voltage according to different countries
e. Machines Materials: All the Pet treats injection machine are made by stainless steel, this line is with reasonable design and with high automation
Injection molding machine molds can be fastened in either a horizontal or vertical position. The majority of machines are horizontally oriented, but vertical machines are used in some niche applications such as insert molding, allowing the machine to take advantage of gravity. Some vertical machines also do not require the mold to be fastened. There are many ways to fasten the tools to the platens, the most common being manual clamps (both halves are bolted to the platens); however, hydraulic clamps (chocks are used to hold the tool in place) and magnetic clamps are also used. The magnetic and hydraulic clamps are used where fast tool changes are required.
The person designing the mold chooses whether the mold uses a cold runner system or a hot runner system to carry the plastic and fillers from the injection unit to the cavities. A cold runner is a simple channel carved into the mold. The plastic that fills the cold runner cools as the part cools and is then ejected with the part as a sprue. A hot runner system is more complicated, often using cartridge heaters to keep the plastic in the runners hot as the part cools. After the part is ejected, the plastic remaining in a hot runner is injected into the next part. Technical Parameter 1. Screw rotating speed read-out. 2. Security code function to avoid missing data or careless changing.
3. Super low pressure clamping ensures security of user, and maintains lifespan of machine efficiently.
4. The response time of the drive system is very fast. It requires only 0.005s to reach the maximum power output, greatly shorten the cycle time.
5. The precision of processing tolerances to produce the plastic parts will be greatly improved. The optimized rate of repeated qualified parts is around 40-130%.
6. Equipped with a rotary encoder and pressure sensor, the pressure flow state of the energy saving the machine will be transmitted to the controller, the command of which will be sent out to the efficient synchronous servo motor to change the rotation and the torque accordingly.
1. Could we visit your factory to check the machine carefully and closely?
You’re more than welcome to visit Darin, will provide machine test running, face to face discussion and turnkey project design solution.
2. Could you afford technician team to guide our installation and commissioning?
Oversea commissioning service provided, our technician will help to install the machine, and teach local workers about operation and maintenance. Buyer should pay for the technician's round flight ticket, accommodation and salary.
3. How long is your machine's guarantee time?
One year since the machine arrive your factory.
4. If some parts break after warranty, what should we do?
Darin supply full-life after sales service, whenever new parts needed, we will help to supply new ones at reasonable price & in shortest time.
5. If we show our workshop size, can you design layout for the whole line?
Auto CAD layout will be provided as client’s workshop size.
6. What is the material of the machine?
Stainless steel, especially parts contacting with materials, conforming to food grade.